[an error occurred while processing this directive]
|
теперь ради интереса проделал все сначала:
команда: avreal32 -p1 -as +mega16 -f -v -%>info.txt
теперь результат такой:
avreal/WIN32 - AVR controllers LPT programmer by Redchuk Alexandr
v1.25rev4 (Mar 24 2006 08:54:51) http://www.ln.com.ua/~real/avreal
bug-reports, suggestions and so on mail to avreal@real.kiev.ua
Command:
-p1 -as +mega16 -f -v -%
% LPT base port 0x378
% assume that LPT data writes not faster then 1uS
% Atmel adapter for STK*00 found
% STK mode
% osc = 800kHz -> setup=3, hold=3,2
% Reset
% PgmOn reply 0x00641300
% Try 1 to resync by reset pulse % PgmOn reply 0x003C5380
% Synchronised after 2 try
% GetID reply 0x00300000
% GetID reply 0x00100001
Not connected
Can't continue
Reset pin released
Adapter disabled
команда: avreal32 -p1 -as +mega16 -o0 -f -v -%>info.txt
результат:
avreal/WIN32 - AVR controllers LPT programmer by Redchuk Alexandr
v1.25rev4 (Mar 24 2006 08:54:51) http://www.ln.com.ua/~real/avreal
bug-reports, suggestions and so on mail to avreal@real.kiev.ua
Command:
-p1 -as +mega16 -o0 -f -v -%
% LPT base port 0x378
% assume that LPT data writes not faster then 1uS
% Atmel adapter for STK*00 found
% STK mode
% osc = 0kHz -> XTAL will be generated
% with SCK low 2 periods, high 2 periods
% Reset
% PgmOn reply 0x00AC5300
% Synchronised after 1 try
% GetID reply 0x00300000
% GetID reply 0x00300001
% GetID reply 0x00300002
% Read ID: 0x000102
Device connected, but not recognised, ID: 0x000102 (looks as protected)
% ReadLock command 0x58000000
% ReadLock reply 0x00580000
Chip locked - reading and programming disabled
% ReadOsccal command 0x38000000
% ReadOsccal reply 0x00380000
% ReadOsccal command 0x38000100
% ReadOsccal reply 0x00380001
% ReadOsccal command 0x38000200
% ReadOsccal reply 0x00380002
% ReadOsccal command 0x38000300
% ReadOsccal reply 0x00380003
Can't continue
Reset pin released
Adapter disabled
команда: avreal32 -p1 -as +mega16 -o0 -e -w -fcksel=4 -%>info.txt
ответ:
avreal/WIN32 - AVR controllers LPT programmer by Redchuk Alexandr
v1.25rev4 (Mar 24 2006 08:54:51) http://www.ln.com.ua/~real/avreal
bug-reports, suggestions and so on mail to avreal@real.kiev.ua
Command:
-p1 -as +mega16 -o0 -e -w -fcksel=4 -%
% Fuse added: CKSEL=4
% LPT base port 0x378
% assume that LPT data writes not faster then 1uS
% Atmel adapter for STK*00 found
% STK mode
% osc = 0kHz -> XTAL will be generated
% with SCK low 2 periods, high 2 periods
% Reset
% PgmOn reply 0x00AC5300
% Synchronised after 1 try
% GetID reply 0x00300000
% GetID reply 0x00300001
% GetID reply 0x00300002
% Read ID: 0x000102
Device connected, but not recognised, ID: 0x000102 (looks as protected)
% ReadLock command 0x58000000
% ReadLock reply 0x00580000
Chip locked - reading and programming disabled
% ReadOsccal command 0x38000000
% ReadOsccal reply 0x00380000
% ReadOsccal command 0x38000100
% ReadOsccal reply 0x00380001
% ReadOsccal command 0x38000200
% ReadOsccal reply 0x00380002
% ReadOsccal command 0x38000300
% ReadOsccal reply 0x00380003
% Erase reply 0x00AC8000
Device erased
% Reset
% PgmOn reply 0x00AC5300
% Synchronised after 1 try
% GetID reply 0x00300000
% GetID reply 0x00300001
% GetID reply 0x00300002
% Read ID: 0x000102
Device connected, but not recognised, ID: 0x000102 (looks as protected)
% ReadLock command 0x58000000
% ReadLock reply 0x00580000
Can't continue
Reset pin released
Adapter disabled
типа девайс стал протектед..