|
|
D:\CCStudio_v3.1\cc\bin>xdsprobe -i
-----[Select the controller]-----------------------------------------
This utility has selected a classic XDS510 emulator.
This utility will operate on port address '0x0'.
That original port address was aliased to '0x0240'.
The controller has an insertion length of '16' (0x0010).
The controller has a revision number of '1' (0x0001).
The controller type is 'The venerable TBC (74ACT8990)'.
The local memory has a base address of '0' (0x000000).
The local memory has a word capacity of '262144' (0x040000).
-----[Perform the scan-path length test on the JTAG IR and DR]-------
This scan-path test uses blocks of 512 32-bit words.
The test for the JTAG IR instruction scan-path length failed.
The many-ones then many-zeros tested length was 38 bits.
The many-zeros then many-ones tested length was 34 bits.
The test for the JTAG DR bypass scan-path length succeeded.
The JTAG DR bypass scan-path length is 1 bits.
-----[Perform the scan-path integrity test on the JTAG IR]-----------
This scan-path test uses blocks of 512 32-bit words.
Starting an Integrity Test using 0xFFFFFFFF.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x00000000.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0xFE03E0E2.
Word 0: scanned out 0xFE03E0E2 and scanned in 0x17F01F07.
Word 1: scanned out 0xFE03E0E2 and scanned in 0x17F01F07.
Word 2: scanned out 0xFE03E0E2 and scanned in 0x17F01F07.
Word 3: scanned out 0xFE03E0E2 and scanned in 0x17F01F07.
Word 4: scanned out 0xFE03E0E2 and scanned in 0x17F01F07.
Word 5: scanned out 0xFE03E0E2 and scanned in 0x17F01F07.
Word 6: scanned out 0xFE03E0E2 and scanned in 0x17F01F07.
Word 7: scanned out 0xFE03E0E2 and scanned in 0x17F01F07.
The details of the first eight errors have been provided.
The utility will not report further errors found by this test.
Some of the 32-bit data values were corrupted - 99.8 percent.
Finished that Integrity Test.
Starting an Integrity Test using 0x01FC1F1D.
Word 0: scanned out 0x01FC1F1D and scanned in 0xE80FE0F8.
Word 1: scanned out 0x01FC1F1D and scanned in 0xE80FE0F8.
Word 2: scanned out 0x01FC1F1D and scanned in 0xE80FE0F8.
Word 3: scanned out 0x01FC1F1D and scanned in 0xE80FE0F8.
Word 4: scanned out 0x01FC1F1D and scanned in 0xE80FE0F8.
Word 5: scanned out 0x01FC1F1D and scanned in 0xE80FE0F8.
Word 6: scanned out 0x01FC1F1D and scanned in 0xE80FE0F8.
Word 7: scanned out 0x01FC1F1D and scanned in 0xE80FE0F8.
The details of the first eight errors have been provided.
The utility will not report further errors found by this test.
Some of the 32-bit data values were corrupted - 99.8 percent.
Finished that Integrity Test.
Starting an Integrity Test using 0x5533CCAA.
Word 0: scanned out 0x5533CCAA and scanned in 0x52A99E65.
Word 1: scanned out 0x5533CCAA and scanned in 0x52A99E65.
Word 2: scanned out 0x5533CCAA and scanned in 0x52A99E65.
Word 3: scanned out 0x5533CCAA and scanned in 0x52A99E65.
Word 4: scanned out 0x5533CCAA and scanned in 0x52A99E65.
Word 5: scanned out 0x5533CCAA and scanned in 0x52A99E65.
Word 6: scanned out 0x5533CCAA and scanned in 0x52A99E65.
Word 7: scanned out 0x5533CCAA and scanned in 0x52A99E65.
The details of the first eight errors have been provided.
The utility will not report further errors found by this test.
Some of the 32-bit data values were corrupted - 99.8 percent.
Finished that Integrity Test.
Starting an Integrity Test using 0xAACC3355.
Word 0: scanned out 0xAACC3355 and scanned in 0xAD56619A.
Word 1: scanned out 0xAACC3355 and scanned in 0xAD56619A.
Word 2: scanned out 0xAACC3355 and scanned in 0xAD56619A.
Word 3: scanned out 0xAACC3355 and scanned in 0xAD56619A.
Word 4: scanned out 0xAACC3355 and scanned in 0xAD56619A.
Word 5: scanned out 0xAACC3355 and scanned in 0xAD56619A.
Word 6: scanned out 0xAACC3355 and scanned in 0xAD56619A.
Word 7: scanned out 0xAACC3355 and scanned in 0xAD56619A.
The details of the first eight errors have been provided.
The utility will not report further errors found by this test.
Some of the 32-bit data values were corrupted - 99.8 percent.
Finished that Integrity Test.
The JTAG IR integrity test has failed.
-----[Perform the scan-path integrity test on the JTAG DR]-----------
This scan-path test uses blocks of 512 32-bit words.
Starting an Integrity Test using 0xFFFFFFFF.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x00000000.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0xFE03E0E2.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x01FC1F1D.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x5533CCAA.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0xAACC3355.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
The JTAG DR integrity test has succeeded.
D:\CCStudio_v3.1\cc\bin>
|
|
E-mail: 
info@telesys.ru
