[an error occurred while processing this directive]
|
Переменные регистровые (reg)
Семейство МАX3000 по включению сбрасывает все регистры в 0.
Ножки реально выставляются так как нужно, но на такую конструкцию ругается:
"Warning: Verilog HDL unsupported feature warning at MYLATCH.v(36): Initial Construct is not supported and will be ignored"
initial
begin
Jwrite=0;
Jread=0;
WR=0;
RD=0;
end
E-mail: info@telesys.ru