[an error occurred while processing this directive]
|
int main(int argc, char *argv[])
{
DCB dcb;
HANDLE hCom;
BOOL fSuccess;
char *pcCommPort = "COM2";hCom = CreateFile( pcCommPort,
GENERIC_READ | GENERIC_WRITE,
0, // must be opened with exclusive-access
NULL, // no security attributes
OPEN_EXISTING, // must use OPEN_EXISTING
0, // not overlapped I/O
NULL // hTemplate must be NULL for comm devices
);if (hCom == INVALID_HANDLE_VALUE)
{
// Handle the error.
printf ("CreateFile failed with error %d.\n", GetLastError());
return (1);
}// Build on the current configuration, and skip setting the size
// of the input and output buffers with SetupComm.fSuccess = GetCommState(hCom, &dcb);
if (!fSuccess)
{
// Handle the error.
printf ("GetCommState failed with error %d.\n", GetLastError());
return (2);
}// Fill in DCB: 57,600 bps, 8 data bits, no parity, and 1 stop bit.
dcb.BaudRate = CBR_57600; // set the baud rate
dcb.ByteSize = 8; // data size, xmit, and rcv
dcb.Parity = NOPARITY; // no parity bit
dcb.StopBits = ONESTOPBIT; // one stop bitfSuccess = SetCommState(hCom, &dcb);
if (!fSuccess)
{
// Handle the error.
printf ("SetCommState failed with error %d.\n", GetLastError());
return (3);
}printf ("Serial port %s successfully reconfigured.\n", pcCommPort);
return (0);
}
Составить ответ ||| Конференция ||| Архив
Ответы
E-mail: info@telesys.ru