а зачем же тогда фига2 на стр.3? и протокол передачи... бляха-муха, недочитал - нах протеус, реальную схему в руки и смотри результат - модель может быть кривой. только реальная схема, а не онанистический резиновый макет ))
Отправлено
werewolf (94.178.30.102) 10 мая 2010, г. 16:56
В ответ на: Дополнение для werewolf отправлено
tonyk 10 мая 2010, г. 16:44
Since data is transmitted over the 3–wire bus LSB first, temperature data can be written to/read from the DS1620 as either a 9–bit word (taking RST low after the 9th (MSB) bit), or as two transfers of 8–bit words, with the most significant 7 bits being ignored or set to 0, as illustrated in Table 3. After the MSB, the DS1620 will output 0s.