Readme из обновления («Телесистемы»: Конференция «Микроконтроллеры и их применение»)

Разработка, производство и продажа радиоэлектронной аппаратуры

Требуется программист в Зеленограде
- обработка данных с датчиков; ColdFire; 40 тыс.
e-mail:jobsmp@pochta.ru

Телесистемы | Электроника | Конференция «Микроконтроллеры и их применение»

Отправлено Elektronik 15 января 2007 г. 13:35
В ответ на: ессно потом надо будет уникраком пройтись. отправлено Elektronik 15 января 2007 г. 13:30

Patch

EW430 patch release version 3.30G

Updated: 2005-10-18 [ILOF]

This patch release has the following purpose:

To correct a problem with that the debugger was not able to erase the information memory on the
following MSP430 devices:

MSP430F2101

MSP430F2111

MSP430F2121

MSP430F2131
To add support for the 2-wire JTAG debug interface, also referred to as Spy-Bi-Wire interface.

File names are given relative to the root directory \Program Files\IAR
Systems\Embedded Workbench 4.0\

bordercolorlight="#808080" ID="Table1">

File name	Version	Description
bin\430fet.dll	3.30G	IAR C-SPY Emulator Driver for MSP430
bin\430proc.dll	3.30G	IAR C-SPY Processor Descriptor for MSP430
bin\hil.dll	1.2.0.5
bin\msp430.dll	2.1.5.0	TI MSP430 low level driver
bin\swtd430.dll	3.30G	IAR Workbench Target Descriptor for MSP430
bin\swtd430fet.dll	3.30G	IAR Workbench Target Descriptor, Emulator, for MSP430
bin\swtd430sim.dll	3.30G	IAR Workbench Target Descriptor, Simulator, for MSP430
config\lnk430F2001.xcl config\lnk430F2002.xcl config\lnk430F2003.xcl config\lnk430F2011.xcl config\lnk430F2012.xcl config\lnk430F2013.xcl config\msp430F2001.ddf config\msp430F2001.sfr config\msp430F2002.ddf config\msp430F2002.sfr config\msp430F2003.ddf config\msp430F2003.sfr config\msp430F2011.ddf config\msp430F2011.sfr config\msp430F2012.ddf config\msp430F2012.sfr config\msp430F2013.ddf config\msp430F2013.sfr		Linker command files and device description files for the new MSP430 devices.
inc\io430x20x1.h inc\io430x20x2.h inc\io430x20x3.h inc\msp430x20x1.h inc\msp430x20x2.h inc\msp430x20x3.h		Standard register and bit definitions files for the new devices.

Exit IAR Embedded Workbench.
Remove the original files. It is important that the old IAR Workbench Target Descriptor files
(swtd430*.dll) are removed from the installation directory.
Extract the new files to the right directories.