[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
На стр. 55
• Bit 6 - ADCBG: ADC Bandgap Select
When this bit is set and the BOD is enabled (BODEN fuse is programmed), a fixed bandgap voltage of 1.22 ± 0.05V
replaces the normal input to the ADC. When this bit is cleared, the normal input pin (as selected by MUX2..MUX0) is
applied to the ADC.
Насчет косвенного метоба измерения VCC - вроде будет работать, только нужно точность и разрешение посчитать.
Имхо, разрешение улучшится при применении внешнего опорника. Но лучше все-таки посчитать ручками.
E-mail: info@telesys.ru