[an error occurred while processing this directive]
|
Поставил WebPACK6.1, скачаный на xilinx.com - XC18V01 - нормально распознал - и микруху прошил. НО при операции проверки(считывания) выскочила ошибка:
// *** BATCH CMD : Verify -p 1
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT:467 - The device 'xc18v01' is in read protect mode. The device contents cannot be read.
'1': Putting device in ISP mode...
done.
'1': Putting device in ISP mode...
done.
'1': The device has 'read-protection' enabled. No read operations are allowed when in this mode.
To disable read protection you must erase the device.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
Возможно это глупо звучит, но что это за "protect mode"? Как его отключить?
E-mail: info@telesys.ru