[an error occurred while processing this directive]
|
Пишет ошибку
"Can't place ClockLock PLL my_pll:clkPLL|altclklock:altclklock_component|pll in the selected device"
Иcпользую EPF10K30EQC208-3
Хелп пишет
"The Fitter cannot place the ClockLock PLL in the device due to device constraints, the global clk0 pin feeds both a register and the PLL through the clock0 port, or the global clk1 signal feeds a register and the PLL."
хотя в проекте все нормально.
Может надо что-то где-то указать или настроить?
E-mail: info@telesys.ru