Отправлено SM 29 января 2003 г. 11:59 В ответ на: LF2407.Gel Simulation отправлено Sobakava 29 января 2003 г. 11:46

menuitem "Memory Maps";
hotmenu F2407_RAM_memory_map()
{
	GEL_Reset(); 						  /* Reset the target */
    GEL_MapReset();
    GEL_MapOn();
 
    /* Program Memory Maps */
    GEL_MapAdd(0x0000,0,0x8000,1,1);      /* 32K address space  RAM*/
    GEL_MapAdd(0x8000,0,0x0800,1,1);  	  /* SARAM                 */
    GEL_MapAdd(0x8800,0,0x7800,1,1);      /* Ext address space  RAM*/
    /* Data Memory Maps */
    GEL_MapAdd(0x0004,1,0x0003,1,1);       /* MMRs               */
    GEL_MapAdd(0x0060,1,0x0020,1,1);    	/* B2                */
    GEL_MapAdd(0x0200,1,0x0200,1,1);    	/* B0B1              */
    GEL_MapAdd(0x0800,1,0x0800,1,1);        /* SARAM             */
    GEL_MapAdd(0x7011,1,0x0004,1,1);   
    GEL_MapAdd(0x7016,1,0x001A,1,1);
    GEL_MapAdd(0x7040,1,0x0007,1,1);
    GEL_MapAdd(0x7048,1,0x0001,1,1);
    GEL_MapAdd(0x704A,1,0x000D,1,1); 
    GEL_MapAdd(0x7058,1,0x0008,1,1);
    GEL_MapAdd(0x7070,1,0x0010,1,1);
    GEL_MapAdd(0x7090,1,0x0030,1,1);    	
    GEL_MapAdd(0x7100,1,0x0130,1,1);
    GEL_MapAdd(0x7400,1,0x0023,1,1);
    GEL_MapAdd(0x7426,1,0x000B,1,1);
    GEL_MapAdd(0x7431,1,0x0001,1,1);
    GEL_MapAdd(0x7500,1,0x0023,1,1);
    GEL_MapAdd(0x7526,1,0x000B,1,1);
    GEL_MapAdd(0x7531,1,0x0001,1,1);    
    GEL_MapAdd(0x8000,1,0x8000,1,1);  	
   /* I/O Memory Maps */
    GEL_MapAdd(0x0000,2,0xFF00,1,1);    
    GEL_MapAdd(0xFF0F,2,0x0001,1,1);
    GEL_MapAdd(0xFFFF,2,0x0001,1,1);
}                      

• Thanks a lot but it did not work... — Sobakava   (29.01.2003 12:32, 255 байт)
  • Are you executing "F2407_RAM_memory_map" ? Or "F2407_ROM_memory_map"? — SM   (29.01.2003 12:37, пустое)
    • GEL>Memory Maps>F2407_RAM_memory_map (the only existin item) — Sobakava   (29.01.2003 12:43, 64 байт)
      • Try to link your program into external memory.... — SM   (29.01.2003 13:00, пустое)
        • how to link it to external memory? — Sobakava   (29.01.2003 14:17, 102 байт)
          • Change .text section destination from FLASH to EXTPROG in the .CMD file. — SM   (29.01.2003 15:03, пустое)
            • It's OK now, working! But "OUT temp1, WSGR" line has same problem. how to change I/O mapping? — Sobakava   (29.01.2003 15:27, 93 байт)
              • Add near of the end of GEL file mappings for used I/O registers. — SM   (29.01.2003 15:31, пустое)
                • Which GEL_XXX( ) command? — Sobakava   (29.01.2003 16:08, пустое)
                  • GEL_MapAdd, same as last three commands. — SM   (29.01.2003 16:10, пустое)
        • Could you send me an empty(nop) project file which can be simulated without any problems? — Sobakava   (29.01.2003 13:47, 202 байт)
          • I'm using emulator (only)... — SM   (29.01.2003 15:06, пустое)
      • May be another GEL file is loaded? With function, that resets memory map when file being loaded? — SM   (29.01.2003 12:58, пустое)
        • Please check your email about screenshot of the problem. — Sobakava   (29.01.2003 13:11, пустое)