Телесистемы
 Разработка, производство и продажа радиоэлектронной аппаратуры
На главную   | Карта сайта | Пишите нам | В избранное
Требуется программист в Зеленограде
- обработка данных с датчиков; ColdFire; 40 тыс.
e-mail:jobsmp@pochta.ru

Телесистемы | Электроника | Конференция «Цифровые сигнальные процессоры (DSP) и их применение»

TLV320AIC14 и 24 в одной упряжке...

Отправлено PGN 25 апреля 2008 г. 11:29


Обнаружил при эксперименте с кодеками, соединенными в одну цепочку. Привожу ответ TI. Может быть кому-то будет полезно.

Dear Customer,
We apologize for the time needed to investigate on this issue.

It has been decided that this issue will be simulated by the design team. However, we currently do not have the resources to quickly provide an answer or results. As of this moment, we cannot provide a specific time frame in which this investigation will be complete.

We did other tests and found out that it seems this issue is present when an odd number of AIC14’s are preceding AIC24’s. If an even number of AIC14’s precedes AIC24’s, the issue apparently is not present.

As mentioned before, if you is currently planning a new design with the AIC14+AIC24 combination, we strongly suggest having only AIC24’s in the cascade chain.
Alternatively, the AIC3106, AIC33 or AIC34 can be set for TDM operation for up to 8 channels in the bus.

Thank you again for your patience.

Kind Regards,

Texas Instruments
European Customer Support Center


Составить ответ | Вернуться на конференцию

Ответы


Отправка ответа
Имя*: 
Пароль: 
E-mail: 
Тема*:

Сообщение:

Ссылка на URL: 
URL изображения: 

если вы незарегистрированный на форуме пользователь, то
для успешного добавления сообщения заполните поле, как указано ниже:
введите число 93:

Перейти к списку ответов | Конференция | Раздел "Электроника" | Главная страница | Карта сайта

Rambler's Top100 Рейтинг@Mail.ru
 
Web telesys.ru