Текст заголовка сообщения полностью: И xdsprobe -i и xdsprobe -y проходят. На этой же машине стоит CCS3.1 и с ним проблем нет, т.е. с железом все нормально, может какие тонкости в настройке есть?

======================================================================
xdsprobe -i

-----[Print the controller-open software log-file]--------------------
This utility has selected an XDS510 class product.
This utility will load the adapter 'sm510dvr.dll'.
This utility will operate on port address '0'.
The controller does not use a programmable FPGA.
The emulator adapter is named 'sm510dvr.dll'.
The emulator adapter is titled 'SM510PCI POD Adapter'.
The emulator adapter is version '33.12.0.0'.
The emulator adapter is using 'Normal-Mode'.
The controller has a version number of '1' (0x0001).
The controller has an insertion length of '16' (0x0010).
The local memory has a base address of '0' (0x000000).
The local memory has a word capacity of '262144' (0x040000).

-----[Perform the standard path-length test on the JTAG IR and DR]----

This path-length test uses blocks of 512 32-bit words.

|| // -- \\  The test for the JTAG IR instruction path-length succeeded.
The JTAG IR instruction path-length is 38 bits.

The test for the JTAG DR bypass path-length succeeded.
The JTAG DR bypass path-length is 1 bits.

-----[Perform the Integrity scan-test on the JTAG IR]-----------------

This test will use blocks of 512 32-bit words.
This test will be applied just once.

Do a test using 0xFFFFFFFF.
Scan tests: 1, skipped: 0, failed: 0
Do a test using 0x00000000.
Scan tests: 2, skipped: 0, failed: 0
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 0
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 0
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 0
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 0
All of the values were scanned correctly.

The JTAG IR Integrity scan-test has succeeded.

-----[Perform the Integrity scan-test on the JTAG DR]-----------------

This test will use blocks of 512 32-bit words.
This test will be applied just once.

Do a test using 0xFFFFFFFF.
Scan tests: 1, skipped: 0, failed: 0
Do a test using 0x00000000.
Scan tests: 2, skipped: 0, failed: 0
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 0
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 0
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 0
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 0
All of the values were scanned correctly.

The JTAG DR Integrity scan-test has succeeded.

======================================================================
xdsprobe -y

-----[Print the controller-open software log-file]--------------------

This utility has selected an XDS510 class product.
This utility will load the adapter 'sm510dvr.dll'.
This utility will operate on port address '0'.
The controller does not use a programmable FPGA.
The emulator adapter is named 'sm510dvr.dll'.
The emulator adapter is titled 'SM510PCI POD Adapter'.
The emulator adapter is version '33.12.0.0'.
The emulator adapter is using 'Normal-Mode'.
The controller has a version number of '1' (0x0001).
The controller has an insertion length of '16' (0x0010).
The local memory has a base address of '0' (0x000000).
The local memory has a word capacity of '262144' (0x040000).

-----[Test the emulator's JTAG controller hardware]-------------------

Starting the Control Register Reset Test.
Finished the Control Register Reset Test.

Starting the Control Register Read-Write Test.
Finished the Control Register Read-Write Test.

Starting the Serial Buffer Normal Read-Write Test.
Finished the Serial Buffer Normal Read-Write Test.

Starting the Serial Buffer Reverse Read-Write Test.
Finished the Serial Buffer Reverse Read-Write Test.

Starting the Status0 Register Test.
Finished the Status0 Register Test.

Starting the Status1 Register Test.
Finished the Status1 Register Test.

Starting the Status2 Register Test.
Finished the Status2 Register Test.

Starting the Status3 Register Test.
Finished the Status3 Register Test.

Starting the Counter Capture Test.
Finished the Counter Capture Test.

Starting the Loop-Back with Reads and Writes Test.
Finished the Loop-Back with Reads and Writes Test.

Starting the Loop-Back Test with All-Ones Test.
Finished the Loop-Back Test with All-Ones Test.

Starting the Loop-Back Test Using All-Zeros Test.
Finished the Loop-Back Test Using All-Zeros Test.

Starting the Loop-Back with Recirculation Test.
Finished the Loop-Back with Recirculation Test.

Starting the Serial Buffer Observe Flag Test.
Finished the Serial Buffer Observe Flag Test.

Starting the State Command's State Machine Test.
Finished the State Command's State Machine Test.

Starting the Counter1 and Counter2 Test.
Finished the Counter1 and Counter2 Test.

None of the test-cases have detected errors.