[an error occurred while processing this directive]
|
Пытаюсь подключить JTAG к OMAP5912
xdsprobe -i выдает:
-----[Select the controller]-------------------------------------------------
This utility has selected a classic XDS510 emulator.
This utility will operate on port address '0x0'.
That original port address was aliased to '0x0240'.
The controller has an insertion length of '16' (0x0010).
The controller has a revision number of '1' (0x0001).
The controller type is 'The venerable TBC (74ACT8990)'.
The local memory has a base address of '0' (0x000000).
The local memory has a word capacity of '262144' (0x040000).
-----[Perform the scan-path length test on the JTAG IR and DR]---------------
This scan-path test uses blocks of 512 32-bit words.
The test for the JTAG IR instruction scan-path length was corrupted.
The test for the JTAG DR bypass scan-path length will not be done.
The error number is '-403' (0xfffffe6d).
-----[An error has occurred and this utility has aborted]--------------------
This error is generated by TI's USCIF driver.
The value is `-403' (0xfffffe6d).
The title is: `SC_ERR_HUNG_RDBUFFER'.
The explanation is:
Failure due to the controller buffer reads are taking too long.
в чем может быть проблема?
E-mail: info@telesys.ru